Iron on and Washing Instructions

HTV Iron-On Instructions:

•Preheat Press to 300° or set iron to (polyester/wool) setting

•Preheat garment for 5 seconds to remove any and all moisture

•Remove paper backing and place sticky side down

•Cover design completely with teflon sheet or parchment paper

•Press with medium pressure for 10-15 seconds(if using iron, lift and move to next area)

•Wait 5 seconds and peel warm

•Once film is removed press image again for an additional 5 seconds to seal.

 DTF Press-On Instructions:

1. To get rid of wrinkles and moisture, press your t-shirt flat for 5 seconds.
2. Set the heat press temperature to 325F for cotton, with medium (60 lb) pressure.
3. Place the DTF transfer on the desired area and cover it with parchment paper, kraft paper, or a Teflon cover sheet.
4. Apply pressure for 20 seconds for cotton garments.
5. Remove it from the heat press, let it cool for approximately 30 seconds or until it reaches room temperature.
6. After a cooling period, carefully peel off the film, ensuring that it effortlessly releases the printed image. In case the printed image fails to adhere to the garment, apply heat pressure and cool once more.
7. Cover the transferred image with parchment paper, kraft paper, or a Teflon cover sheet and heat press it again for 15 seconds.
8. Your custom t-shirt or garment is now ready to wear!

Washing Instructions

• Wash Inside Out

• Machine Wash In Cold Water

• DO NOT BLEACH

• DO NOT DRY CLEAN

• Iron Inside Out 

• Tumble dry at low heat